Home > Bearing Tools > Bearing Pullers >

SKF TMMD 100 Deep Groove Ball Bearing Puller Kit
SKF TMMD 100 Deep groove ball bearing puller kit
 
Our Price: $1,189.77
Sale Price: $1,129.13
You save $60.64!


Availability:: Call to Check Availability
Product Code: SKF-TMMD 100
Qty:

Description
 

Easy dismounting of bearings in blind housings

The SKF TMMD 100 is especially designed to allow easy and quick dismounting of deep groove ball bearings with interference fit on both rings. The puller is suitable for use in both blind housings and shaft applications. In addition to dismounting open bearings, the TMMD 100 can be used to dismount sealed bearings after the removal of the seal. The puller kit contains six sets of different size puller arms, two spindles and one handle packed in a carrying case. The TMMD 100 is suitable for dismounting up to 71 different SKF deep groove ball bearings from shaft diameter ranging between 10 and 100 mm (0,4 - 3,9 in).

  • The claws are especially designed to facilitate a precise fit in the bearing's raceways, providing good grip and allowing the application of higher dismounting forces
  • Each puller arm is fitted with a spring for easy installation
  • The puller arms are made of a single piece, laser-cut hardened-steel for strength and longevity
  • Arm sizes 4, 5 and 6 are fitted with filling plates to accommodate a wide range of bearings The hexagon head of the spindle is equipped with an anti-slip pin, which prevents the spanner from sliding down the spindle during dismounting
  • The rotation angle of the claw has been limited to allow easy insertion
  • The designation is laser-engraved on the arms allowing easy identification and selection

  • The rubber cap allows easy and quick attachment of the arms to the spindle.
  • It also prevents the puller arms from detaching from the spindle during operation
  • The springs are color-coded for easy arm selection and matching
  • Bearing selection chart included

Technical Details:

  • Suitable bearings:
    • 6000 - 6020
    • 6200 - 6218
    • 6300 - 6313
    • 6403 - 6410
    • and more (see chart below)
  • Effective length:
    • A1
      • L: 135 mm (5.3 in)
      • H: 16 mm (0.6 in)
      • E: 79 mm (3.1 in)
    • A2
      • L: 135 mm (5.3 in)
      • H: 16 mm (0.6 in)
      • E: 79 mm (3.1 in)
    • A3
      • L: 137 mm (5.4 in)
      • H: 23 mm (0.9 in)
      • E: 77 mm (3.0 in)
    • A4
      • L: 162 mm (6.4 in)
      • H: 26 mm (1.0 in)
      • E: 52 mm (2.0 in)
    • A5
      • L: 167 mm (6.6 in)
      • H: > 52 mm (> 2.0 in)
      • E: 49 mm 1.9 in)
    • A6
      • L: 170 mm (6.7 in)
      • H: > 100 mm (> 3.9 in)
      • E: 49 mm (1.9 in)
  • Weight: 3.8 kg (8.4 lb)
  • Dimensions of case: 395 x 300 x 105 mm (15.5 x 11.8 x 4.1 in)
  • Contents:
    • 3 - puller arms TMMD 100-A1
    • 3 - puller arms TMMD 100-A2
    • 3 - puller arms TMMD 100-A3
    • 3 - puller arms TMMD 100-A4
    • 3 - puller arms TMMD 100-A5
    • 3 - puller arms TMMD 100-A6
    • 1 - small spindle and nut
    • 1 - big spindle and nut
    • 1 - handle
    • 1 - language-free instructions for use booklet

Selection chart - TMMD 61

Ball bearing type
SKF standard bearing

Arm

Spindle

160..

161..

60..

62..

63..

62/..
63/..

64..

16002
16003

16100
16101

6000
6001
6002
6003

6200

TMMD A1

TMMD M12

6004
6005
6006

6201
6202
6203

6300

TMMD A2

16011

6007
6008
6009
6010

6204
6205

6301

62/22


TMMD A3

6011
6012
6013

6206

6303
6304

63/22
62/28

TMMD A4

6014
6015
6016
6017

6207
6208
6209
6210
6211

6305
6306
6307

63/28

6403

TMMD A5

TMMD M16

6018
6019
6020

6212
6213
6214
6215
6216
6217
6218

6308
6309
6310
6311
6312
6313

6404
6405
6406
6407
6408
6409
6410

TMMD A6


Accessories for this product...
SKF TMMD A3 SKF TMMD A2 SKF TMMD A4 SKF TMMD A1
Our Price: $51.56

Add
Our Price: $47.67

Add
Our Price: $55.66

Add
Our Price: $43.60

Add
SKF TMMD A3 SKF TMMD A2 SKF TMMD A4 SKF TMMD A1
SKF TMMD A6
Our Price: $63.68

Add
SKF TMMD A6


Browse for more products in the same category as this item:

Bearing Tools > Bearing Pullers